Hello,
Installing an EVO-ONE into a 2007 Outback, manual trans. Have triple checked and tested connections according Connection 3 on this guide: https://cdn02.fortin.ca/download/28721/evo-one_subaru_d20150115.pdf
I followed the programming steps, blue light flashes rapidly confirming it is programming. I also tried resetting the bypass portion multiple times, everytime it recognizes the vehicle and the blue light flashes rapidly to confirm programming.
I also have Flashlink, and played around with a few options concerning the door locks, but still nothing.
If I put the device in automatic transmission mode, it is able to start the vehicle, but it does not lock/unlock the doors properly. It also doesn't seem to recognize door/parking-brake status, as I can't get it to go into Ready-Mode in manual transmission mode.
It is being installed in conjunction with the RF642W rf kit.
Any help would be greatly appreciated!
Thank you,
Brandon